|
|
The investigation of an Al-Zr-Ti alloy prepared by spark plasma sintering of atomized powder
Molnárová, O. ; Málek, P. ; Lukáč, František ; Chráska, Tomáš ; Cinert, Jakub
The microstructure and mechanical properties of a powder metallurgical Al-Zr-Ti alloy was studied. Fine powder with a typical size below 50 ?m was prepared by gas atomization. The smallest powder particles with a diameter below 10 ?m exhibited a segregation free microstructure. Larger droplets were found to contain intermetallic particles rich in Zr and Ti. The gas atomized powder was consolidated by spark plasma sintering (SPS) at various temperatures ranging from 450 to 550 °C. During SPS the materials microstructure remained nearly unchanged and a fine grain size between 2 and 3 ?m was observed. All SPS samples exhibited a microhardness of around 90 HV. The annealing (1 h, 500 °C) of the sample sintered at the highest temperature (550 °C) resulted in a decrease of microhardness to 75 HV as a result of changes in the phase composition, the fine grain size was retained. Natural aging at room temperature was not observed.
|
|
|
On tungsten spraying using inductively coupled plasma system - First results
Klečka, Jakub ; Mušálek, Radek ; Vilémová, Monika ; Lukáč, František
Thanks to its unique properties such as high melting point and density, tungsten and tungsten-based alloys are commonly used in a wide range of applications. Among others, these materials are promising candidates for the plasma facing components in the future fusion reactors. One of considered ways of production of these parts is plasma spraying. There are however several limitations for conventional gas stabilized torches, mainly in plasma enthalpy (i.e. the ability to efficiently melt tungsten particles in considerable feed rates) and susceptibility of tungsten to oxidation (which complicates spraying in oxidizing open-air atmosphere). The radio frequency inductively coupled plasma torch (RF-ICP) is a unique system which can potentially overcome both these problems and can be used for efficient tungsten spraying. The tungsten powder, which can be finer than the one used for the conventional systems, is fed axially into the hot plasma core, both factors lead to a more efficient melting of the particles. The deposition is performed in a chamber with controlled atmosphere of inert gas or decreased pressure, the oxidation is therefore suppressed. In this first study carried out with the newly commissioned RF-ICP system TekSpray 15 (Tekna), samples of tungsten coatings on graphite substrates were prepared. The X-ray diffraction and SEM images of the free surfaces and cross-sections were obtained, documenting high purity of the deposits and appropriate flattening of the splats leading to a dense coating microstructure. The effect of substrate preheating on the microstructure, porosity and hardness was also studied.
|
guest ::
